Milesight AM100 Series Sensor supports 3 types of display modes as below.

Mode 1Mode 2
Mode 3

Mode 1
Mode 2
Mode 3

This article will guide you how to switch display mode on the screen.


Milesight LoRaWAN Sensor: AM104/AM107


Here are 3 methods to switch among the three modes:

  • Power button: Quick press the power button to switch the mode.

  • Mobile App: Go to Milesight ToolBox App menu Device -> Setting -> General Settingsto select screen display mode, and then click Write to set.

  • Software: Go to Toolbox menu Device Settings -> Basic -> Basic Settingsto select screen display mode, and click Save.