Getting Started
Description When first using Milesight LoRaWAN sensors, it's suggested to change the frequency and channels which match your gateway and reduce the pos...
Thu, 10 Nov, 2022 at 2:37 PM
Introduction Rejoin mode is a feature for every Milesight LoRaWAN end device to set up network connections automatically when LoRaWAN gateway or network se...
Thu, 25 May, 2023 at 2:51 PM
Description Milesight nodes support to sync device time which can display on the screen or for data storage and retransmission feature , this article will ...
Mon, 31 Oct, 2022 at 8:39 PM
Description Milesight sensors support data retransmission feature which is to ensure no data loss if network is down suddenly for some times. There are two...
Fri, 2 Jun, 2023 at 3:18 PM
Contents Introduction Application Example Requirements D2D Controller Configurations D2D Agent Configurations FAQ Introduction Milesight D2D ...
Wed, 11 Sep, 2024 at 9:25 AM
Description User can use NFC reader to configure Milesight sensors by PC, rather than open the shell of sensor to get internal serial port. That will he...
Wed, 12 Jan, 2022 at 7:59 PM