Description

When first using Milesight LoRaWAN sensors, it's suggested to change the frequency and channels which match your gateway and reduce the possibilities of package loss and network join failed. 

For 868 model, default frequency is EU868 and supports change to IN865/RU864;

For 915 model, default frequency is AU915 and supports change to US915/AS923/KR920.


Requirement

  • Milesight LoRaWAN Sensors
  • Toolbox (Mobile APP or Windows Software)


Configuration

1. Open the sensor via Toolbox or power button.

2. Use Toolbox to change the LoRa frequency or channels.

Method 1: Open Toolbox APP and go to Setting -> LoRaWAN Settings to change the Supported Frequency and Channels. If you also use Milesight gateways and keep default AU915/US915 frequency settings, please change the index to 8-15.

Method 2: Open the Toolbox software on PC and go to LoRaWAN Settings -> Channel change the Supported Frequency and Channels. If you also use Milesight gateways and keep default AU915/US915 frequency settings, please change the index to 8-15.