Is it possible to connect AT-101 to Milesight IoT Cloud or to The Thing Stack Cloud

Posted about 1 year ago by Alberto Dimerman

Post a topic

Un Answered

Alberto Dimerman

I am conducting tests with the UG-67 Gateway and AT-101 devices to evaluate their tracking and monitoring capabilities. Upon reviewing the documentation for both platforms (Milesight IoT Cloud or to The Thing Stack Cloud) , I noticed that the AT-101 is not explicitly listed as a compatible device.

Could you confirm if connecting the AT-101 to either of these platforms is feasible? If so, could you please provide instructions for establishing the connection and clarify whether it is possible to operate the AT-101 directly through the platform?

Alberto

0 Votes

2 Comments

Mandarin Li posted about 1 year ago Admin

Hi Alberto,

Thanks for contacting Milesight-IoT support team.

Both Milesight IoT Cloud and The Thing Stack Cloud currently support AT101 connectivity.

For Milesight IoT Cloud, you need to enable Milesight IoT Cloud in UG67 first, then add AT101 in Milesight IoT Cloud. Kindly refer to the articles below for more detailed steps.

1. How to Connect Milesight Gateway to Milesight IoT Cloud: https://support.milesight-iot.com/support/solutions/articles/73000514191

2. How to Add a Device to Milesight IoT Cloud : https://support.milesight-iot.com/support/solutions/articles/73000514209-how-to-add-a-device-to-milesight-iot-cloud

For The Thing Stack Cloud, you need to connect the gateway to The Thing Stack Cloud by semtech or basic station, and then add AT101 to The Thing Stack Cloud. Kindly refer to the articles below for more detailed steps.

1. Connecting Gateway to TTS via Semtech: https://support.milesight-iot.com/support/solutions/articles/73000514119-the-things-stack-milesight-gateway-integration-via-semtech-packet-forwarder

2. Connecting Gateway to TTS via Basic Station : https://support.milesight-iot.com/support/solutions/articles/73000514079-milesight-gateway-the-things-stack-ttn-integration-via-basic-station

3.Add sensor to TTS : https://support.milesight-iot.com/support/solutions/articles/73000514216-the-things-stack-milesight-lorawan-device-integration

Make sure that the gateway has the correct network connection for the process of connecting to different platforms: https://support.milesight-iot.com/support/solutions/articles/73000514278-how-to-connect-milesight-gateway-to-the-internet

Best Regards,

Mandarin Li

0 Votes

Alberto Dimerman posted about 1 year ago

Hi,

I can answer myself. I tryed yestrday and I was able to connect the AT-101 to the Milesight IoT Cloud withut problems.

Only one thing ot take into account. Sw release of AT-101 must be 1.2 becasue the precious one has some issues regarding coordinates interpretation.

But AT-101 can be connected without problems to the Milesight IoT Cloud

0 Votes