Q1: Why the default LAN port IP address of Milesight Router change to but not

Answer: When router connect to network which is occupied by other device, Milesight router will change the default bridge IP address from to automatically to avoid IP conflict.

Q2: What TLS version of UR32 OpenVPN support?

Answer: UR32 uses OpenVPN 2.4.9 with OpenSSL 1.0.2k, which support TLSv1.0, TLSv1.1, TLSv1.2.

Q3: For UF31,does it support multi APN and APN to VLAN mapping on that modem?

Answer: Not support yet.

Q4: Can the UR32L be powered with 7.2V instead of 9V?

Answer: No, the power supply voltage of UR32L is DC 9-48V, a power supply lower than 9V will cause the device to fail to start normally.

Q5: Does UF51 support esim?

Answer: No support yet. It still needs to use normal sim card.

Q6: Does milesight router have FXS port?

Answer: Yes, UR35 supports FXS optional.