How to Login the Web GUI of Gateway?

Ursalink LoRaWAN gateways provide friendly web interfaces for quickly configurations.

Default username: admin

Default password: password

Login via Ethernet Port

There are two kinds of default IP:

Please take label on the gateway as standard.

Step 1: Connect Ethernet port of gateway to computer.

Step 2: Go to Control Panel->Network and Sharing Center->Change Adapter Settings.

Step 3: Select "Ethernet" and click "Properties".

Step 4: Select "Internet Protocol Version 4(TCP/IPv4)" and click "Use the following IP address".

Then configure the "Default gateway" as default IP of UG6x or UG8x (192.168.23.150 or 192.168.1.1).

Note: you can also select "Obtain an IP address automatically" if default IP is 192.168.1.1.

Step 5: After saving the configurations, open a browser and type the default IP to access the web GUI.

Applicability: UG6x or UG8x Wi-Fi model

Default IP: 192.168.1.1

Step 1: Search for Wi-Fi access point "Ursalink_******" and connect the computer to the access point.

Step 2: Open a browser and type the default IP to access the web GUI.