The Milesight IoT Cloud is a comprehensive cloud service that provides unparalleled levels of vertical integration with Milesight devices, which allows us to connect them in a fast way. In this article, we will get to know how fast the Milesight Gateway can be connected to Milesight Cloud.
- Milesight Gateway UG6x or UG8x
- Milesight IoT Cloud
Step1. Register Milesight IoT Cloud account.
- Click here to register your own account on Milesight IoT Cloud.
- Click 'Register Now', you will need to choose the server region.
- Click Next, you will receive an email with verification code.
- Type the code and click Submitto finish registration and then you can login with your account.
Step2. Milesight IoT Cloud Configuration
- Go to My Devices -> Gatewayto adda gateway with gateway's SN. You can copy the SN (Serial Number) on Status -> Overview page of gateway.
Step3. Gateway Configuration
- Refer to this link to connect the gateway to the Internet.
- Go to Network Server -> Generalto enable Network Server and Milesight IoT Cloud
Click Save & Apply.
- Make sure Milesight internal network server is enabledunder Packet Forwarder -> General, which is the default destination of packet forwarder.
Go to My Devices -> Gateways of Milesight IoT Cloud, you will see the status display online shortly.
At the same time, you will receive an email about noticing the gateway is online, which is enabled by default.
- To connect MilesightGateway to Milesight IoT Cloud, we need to input the SN (Serial Number) Instead of the Gateway EUI or Gateway ID on Network Server
- When the gateway is connected to Milesight IoT Cloud, it cannot connect to other platforms
- If you found the Milesight IoT Cloud doesn't allow you to add the gateway with existing SN, try to check it with your colleague whether this SN has been added under other accounts, or send the SN to Milesight Support to double check.