Ursalink Cloud provides integration with following Ursalink devices (sensors, sensor nodes, remote I/Os):
- UC3x Cellular/NB-IoT Remote I/O
- UC11 Series LoRa Controller
- UC11-N1 Sensor Node
- UC11-T1 Temperature and Humidity Sensor
- AM100 Series Indoor Ambience Sensors
- EM300 Series Outdoor Sensors
- EM500 Series Outdoor Environment Sensors
It does not support adding other band devices.
Before adding devices to Ursalink Cloud, please confirm your gateway have connected to Ursalink Cloud.
Step 1: Check Gateway Status
You can start to add devices when the gateway status shows
Step 2: Add End Devices
On the “My Devices” page, enter SN and click “Add” to complete the add.
Step 3: Configuring Device
After the device is successfully connected, you can click to perform device configuration. The configuration page varies by product model.
Note: if it is a Class A end device that you have configured on the Ursalink Cloud, the changes will take effect at the time when it sends uplinks to the gateway.
After these steps, you can receive data from the device on Ursalink Cloud. If no data please refer to troubleshooting How To Trouble-shoot No Sensor Node's Data Displayed On Ursalink Cloud.