Requirements
- Ursalink UR Series Router or a UG Series Gateway
- Ursalink DeviceHub Account
Note: you can contact Ursalink technical support or Ursalink sales for Ursalink Devicehub trial account.
Here are the steps.
Check Network Connection
Step 1: Log in the web GUI of gateway/router.
Step 2: Connect the device to the Internet. After that, you can go to “Maintenance” > “Tools” > “Ping” and enter a host name to see if the network is accessible.
Add Deivcehub Server
Go to “System” > “Device Management” to configure the devicehub parameters.
For a router
Server Address:devicehub.ursalink.com (or your Devicehub server address)
For a gateway
Activation Server Address:devicehub.ursalink.com (or your Devicehub server address)
Device Management Server Address:http://devicehub.ursalink.com:8080/acs (or your Devicehub server address:8080/acs)
Select Activation Method
By Authentication Code
Step 1: Log in to your DeviceHub account.
Step 2: Go to “Device” > “My Device” and click “Add” button. Then copy the authentication code or send it to other email. When device added, you can copy and past the code to “Authentication Code” on the web GUI.
Step 3: Select “By Authentication Code” as activation method on the router/gateway web GUI.
Step 4: Paste the authentication code to corresponding box in the web GUI and click “Connect”.
By ID
Step 1: Select “By ID” as activation method on the Web GUI.
Step 2: Enter your DeviceHub account and password.
Step 3: Click “ Connect”.
Successfully Connected
For a router
When you finished the above settings and the status displays as “Connected”, the router has already successfully connected to DeviceHub.
For a gateway
When you finished the above settings and the status displays as “Connected”, the gateway has already successfully connected to DeviceHub.
Comments
0 comments
Please sign in to leave a comment.